The system precisely controls the phase of every MEMS sensor to achieve ultra-long-range acoustic source detection and localisation. An onboard AI module analyses the acoustic signature to accurately distinguish whether the detected object is a small FPV drone, a large fixed-wing UAV, a large helicopter, or a low-altitude terrain-hugging cruise missile, automatically filtering out non-target objects.
Once the system identifies a target, it sends the target’s azimuth and elevation angles to an optical tracking gimbal, which performs secondary image recognition and then tracks and locks the target.
Because it uses 128 high-precision MEMS acoustic sensors, detection range for large gasoline-engine fixed-wing UAVs exceeds 1 km. When the units are networked and stream data back to a central server in real time, a rough calculation shows that 120 units can deliver gap-free acoustic drone detection across a 320 km² circular area.
Key Features
- 128 MEMS Acoustic Sensors — high-precision array for drone detection and classification
- Long Detection Range — 1.5 km for gasoline-engine UAVs (Shahed-136/A-196), 1.2 km for low-altitude cruise missiles, 1 km for electric 13-inch drones
- AI Acoustic Fingerprinting — identifies incoming threat type via sound-signature matching
- Real-Time Azimuth & Elevation — provides target bearing, elevation and approximate speed for optical gimbal handoff
- Networked Coverage — 120 units cover 320 km² with over 95% detection rate and 10+ km detection range
- Early Warning — gives protected facilities sufficient reaction and preparation time
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | Aomway Drone Sound detector |
| Sensors | 128 MEMS acoustic array |
| Detection Range | 1-1.5 km (per unit) |
| Network Coverage | 320 km² with 120 units |
| Detection Rate | > 95% |
| Output | Azimuth, elevation, speed |
| SKU | Aomway Drone Sound detector |
Engineered by Aomway. AI-powered acoustic detection for counter-drone and air-defense early warning. For inquiries, bulk pricing, or custom requirements, contact us at info@aomway.com.
Frequency Plan & Pinout
Band and channel data below is taken from this unit’s own published specification table.
Awaiting source data: the connector pinout drawing, the per-revision button / jumper sequence for band and power selection, and the downloadable PDF datasheet are not yet published for this model. Aomway will not print a wiring diagram it has not verified — request the engineering package and we will send the signed drawing for your hardware revision.
Request Datasheet & Pinout (PDF)Read the Technical DocsRecommended Accessories
Matching the antenna and cabling to the band is what actually decides usable range. These are the parts we ship alongside this unit most often.
Aomway Commander V2 FPV Goggles
Commander V2 goggles – the ground-station display we build and support ourselves.
View product →Also required for a complete install: a coax extension / antenna pigtail cut for this band, and an LC filter module for noisy power rails. Both are supplied on request — email [email protected] with your airframe and we will spec the correct length and connector.
Browse all antennasBrowse all video transmitters