- Frequency5500 – 6000 MHz
- Weight0.1 kg
- ConnectorSMA Male / RP-SMA Male
Key Features
- 12dBi High Gain — Concentrated signal strength for extended FPV range and clearer video feed
- 5.8GHz Full Band Coverage — Operates across 5500–6000MHz, compatible with all major FPV and WiFi protocols
- Yagi Directional Design — Optimized radiation pattern focuses energy where you need it most
- SMA Male & RP-SMA Male Options — Works with most FPV goggles, receivers, and ground stations
- 60W Maximum Power — Handles high-power transmitters without degradation
- Compact & Lightweight — Ø30mm × 75mm, only 0.1kg with 100mm feed line
- VNA Bench Tested — Every unit verified: SWR < 2.0 across the full band
- -40°C to 85°C Rated — Built for real-world field conditions
Technical Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 5500 – 6000 MHz |
| Gain | 12 dBi |
| VSWR (SWR) | < 2.0 |
| Impedance | 50 Ω |
| Polarization | Vertical or Horizontal |
| Radiation Pattern | Directional |
| Maximum Power | 60W |
| Connector | SMA Male / RP-SMA Male |
| Dimensions | Ø30mm × 75mm |
| Feed Line | 100mm |
| Operating Temp | -40°C ~ +85°C |
| Weight | 0.1 kg |
Applications
- FPV drone racing and freestyle — improve video link clarity at distance
- FPV long-range missions — extend effective range with focused beam
- Ground station receiver — better signal pickup from airborne drones
- WiFi 5.8GHz band — point-to-point or point-to-multipoint links
Frequency Plan & Pinout
Band and channel data below is taken from this unit’s own published specification table.
| Item | Value |
|---|---|
| Frequency Range | 5500 – 6000 MHz |
Awaiting source data: the connector pinout drawing, the per-revision button / jumper sequence for band and power selection, and the downloadable PDF datasheet are not yet published for this model. Aomway will not print a wiring diagram it has not verified — request the engineering package and we will send the signed drawing for your hardware revision.
Request Datasheet & Pinout (PDF)Read the Technical DocsRecommended Accessories
Matching the antenna and cabling to the band is what actually decides usable range. These are the parts we ship alongside this unit most often.
Aomway 5.8GHz FPV Directional Antenna 12dBi Yagi
High-gain directional antenna for the 5.8 GHz band – extends usable range well beyond a stock whip.
View product →Aomway Commander V2 FPV Goggles
Commander V2 goggles – the ground-station display we build and support ourselves.
View product →Also required for a complete install: a coax extension / antenna pigtail cut for this band, and an LC filter module for noisy power rails. Both are supplied on request — email [email protected] with your airframe and we will spec the correct length and connector.
Browse all antennasBrowse all video transmitters